SIMULATION OF 1Ø AND 3Ø DIODE CONVERTER USING R,RL LOAD
23:00:00
1. SIMULATION OF 1Ø AND 3Ø DIODE CONVERTER USING R,RL LOAD
download 1phase converter circuit schematics
download 1phase converter pspice graph simulation
download 3 phase converter Schematics
download 3 phase converter graph
AIM
download 1phase converter circuit schematics
download 1phase converter pspice graph simulation
download 3 phase converter Schematics
download 3 phase converter graph
1. SIMULATION OF 1Ø AND 3Ø DIODE CONVERTER USING R,RL LOAD
download 1phase converter circuit schematics
download 1phase converter pspice graph simulation
download 3 phase converter Schematics
download 3 phase converter graph
AIM
To simulate single phase and three phase diode converter
using R and RL load, using PSpice.
PRINCIPLE
Single phase full wave diode converter with R load –this circuit is
known as bridge rectifier and it is commonly used in industrial applications.
During positive half cycle of output voltage, power is supplied to the load
through diodes D1 & D2. During negative half cycle diodes D3 & D4
conducts. The peak inverse voltage of a diode is Vm. With a resistive load, load
current is identical in shape to the output voltage.
But in practice most
of the loads are inductive and load current depends on the values of load
resistance and load inductance. Input voltage is given as Vs=Vm sinωt =
Vs sinωt.
Vs sinωt.
Load current io =
Vs sin(ωt-ө) + A1
e^(-(R/L)t) – E/R
Vs sin(ωt-ө) + A1
e^(-(R/L)t) – E/R
A three phase bridge rectifier is commonly used in high power
applications and it gives six pulse ripples on the output voltage. The diodes
are numbered in the order of conduction sequences and each one conducts for 120
ͦ. The conduction sequence for diode is D1-D2, D2-D3, D3-D4, D5-D4, D5-D6 and
D1-D6. The pair of diodes which are connected between that pair of supply lines
having the highest amount of instantaneous line to line voltage will conduct.
PSpice is the proprietary software tool suite used primarily for
electronic design automation (EDA). The software is used mainly by electronic
design engineers and electronic technicians to create electronic schematics and
electronic prints for manufacturing printed circuit boards.
PROCEDURE
1.
Open PSpice schematics from the start
menu.
2.
Open new schematics from fileànew.
3.
Place components from components menu.
4.
Wire up the circuit using “wire” from the
DRAW option.
5.
Save the schematics.
6.
Set the simulation time from ANALYSISàSETUPàTRANSIENTS, set the
stop time to 100ms.
7.
Create netlist by ANALYSISàCREATE NETLIST to check
for the errors.
8.
Simulate the schematics.
RESULT
Single phase and three phase diode converter using R and RL load
using PSpice was simulated.
download 1phase converter circuit schematics
download 1phase converter pspice graph simulation
download 3 phase converter Schematics
download 3 phase converter graph
Subscribe to:
Posts (Atom)
0 comments:
Post a Comment